Chimney & Fireplace Services for Minnesota Homes

The leading cause in Minnesota is freeze-thaw cycling. Water enters porous brick and mortar, freezes and expands, then thaws — repeatedly fracturing the material from within. Inadequate crowns, failing flashing and missing or undersized caps all compound the problem by allowing more water to reach the masonry.

Yes, in most cases. Cracked mortar joints are addressed with chimney repointing. Individual damaged bricks can be replaced. Crown cracks can often be sealed with a flexible sealant or rebuilt if severely deteriorated. A full rebuild is typically needed only when structural damage is extensive and widespread.

No. The majority of chimney damage — including deteriorated mortar, spalling brick, cracked crowns and failed flashing — can be resolved with targeted repair rather than full reconstruction. A professional evaluation determines the appropriate scope of work.

Chimney leaks most commonly result from one or more of the following: a cracked or missing crown, failed flashing at the roofline, an absent or undersized cap, deteriorated mortar joints, or porous masonry. Because multiple components can contribute simultaneously, the source must be identified before repair begins.

Yes. Addressing deteriorated masonry, sealing the crown, repairing flashing and replacing or installing a cap significantly reduces water entry into both the chimney system and the adjacent structure. A vapor-permeable chimney waterproofing treatment applied after repairs can further reduce moisture absorption into the masonry.

Spalling brick refers to brick that has begun to flake, chip or fracture on its outer face — typically because moisture has penetrated the brick and frozen inside. Spalling reduces the structural integrity of the masonry wall and is a reliable indicator of active freeze-thaw damage that will worsen without intervention.

Minor chimney crown cracks are filled and sealed with a flexible elastomeric crown sealant. More extensive cracking or structural failure of the crown requires partial or complete rebuilding using a properly sloped mortar or concrete mix that sheds water away from the masonry below.

Yes. If the flashing has separated or failed while the surrounding masonry and crown remain in acceptable condition, flashing repair can be completed as a focused, standalone repair. An on-site evaluation confirms whether flashing is the primary source of water entry.

Duration depends entirely on the repair scope. Targeted repairs such as repointing a small section or replacing a cap may be completed in a single visit. Larger masonry repairs, crown reconstruction or stack work may require multiple visits and appropriate curing time between stages.

Yes — always. A chimney inspection identifies the affected components and likely source of the problem, which is essential for planning an accurate and effective repair. Without evaluation, there is a significant risk of repairing visible symptoms while the underlying cause continues causing damage.

Photos can help a technician assess general condition and visible symptoms before an on-site visit. However, an in-person evaluation is required to confirm the damage source, inspect concealed components such as flashing, and accurately assess the full extent of deterioration.

Late spring through early fall is generally optimal — temperatures support proper mortar curing and work can be completed before the next freeze cycle. That said, urgent concerns such as active water leaks or structurally compromised masonry should be evaluated promptly regardless of season.

Call Chimney Crickets directly at (612) 280-2467 or use the online request form below to describe your visible symptoms and property location. A technician will follow up to schedule your evaluation.